Must-Know Steps in Building a Sturdy New Driveway – Recommendations to Remember

Before starting any construction project, it is important to measure the ground space to ensure that you’ll have enough room to accommodate your new driveway. It’s important to grade the area properly and check the boundaries of the land you’re working with to ensure that you have plenty of room for your car.

Once you’ve determined the size and shape of your new driveway, you can begin the construction process. You can use wooden stakes to visualize the boundaries of the area. After the first few layers of concrete, you’ll need to install a middle layer of gravel. This layer is made of two to three inches of stones.

You’ll need a shovel to spread the gravel and mix the concrete. A form is made out of heavy wooden stakes and 3/4″ plywood. After removing the old materials, you’ll need to compact the new concrete. A small excavator will allow you to complete the work quickly.

Adding Layers of Concrete

Once the base has been completely compacted, you’ll need to add a read and a new layer of concrete. Once you’ve placed the concrete, it’s time to prepare the surface. You’ll need to level the ground and remove any vegetation or sod before you begin installing the concrete.

Once you’ve installed the concrete, it’s time to remove the sod and topsoil. If you’ve had to cut out sections of the yard before, hire a contractor to take care of this for you. Using heavy equipment and advanced machinery can reduce your headaches and make the process quicker and easier.

The width and thickness of the driveway should be considered. Each foot of width will add to the cost. For a single vehicle, a driveway with 10 to 12 feet should be ample. The final step is preparing the area for installation. It may be necessary to obtain a permit for the driveway.

Checking the Requirements

A city website will list the requirements and the application process. You should carefully review the rules and regulations before beginning the installation. During the excavation phase, you should also mark the area of the driveway with wooden stakes or string.

You need to make sure the concrete is thick enough for the structure. Then, you’ll need to mark the area with a final grade. In Leblanc’s parish, a single-lane driveway requires eight inches of thickness.

In the next phase, you should determine whether the area you’re excavating will be wide enough to accommodate the flora and buildings on the property. After preparing the area, you’ll need to prepare the structure. You’ll need permits for your project. Projects like installing a new driveway will most definitely be more cost-effective when you choose to work with specialists.

Matching Your House’s Layout

A new driveway will need to be constructed with concrete that is compatible with the layout of the house. A professional site planner will be able to help you with this, so the entire process will go smoothly. It is important to plan ahead of time so that you can build a new driveway that will fit your home’s architecture.

Once the foundation is ready, the contractor will build the new driveway. Once the foundation is ready, the contractor will use heavy equipment to scrape off the top layer of soil. Typically, the cost of a new driveway will range from $2,500 to $6,500.

Things to Do Before Hiring a Contractor

Before hiring a driveway contractor, homeowners should get several estimates from different companies. Then, they should choose a design and decide on the materials for their new driveway. During the construction phase, you will need to prepare the site for the new driveway.

This includes a concrete overlay and the installation of a sealant. If you’re installing a new asphalt driveway, you will need to have a site plan. Once the concrete has completely cured, you can move on to the next step.

A proper site plan will allow you to see how the job is progressing and ensure that you’re not violating any rules. After the concrete has been laid, you’ll need to lay the road base. This is the foundation for your new driveway. The road base should be level and stable before you pour the concrete.

Afterward, you can walk on the freshly paved surface. Remember to place warning tape and paint the driveway with protective coats and sealants to protect the new material. This is not a DIY project, but it’s worth considering before attempting the installation.